RF Microneedling Hifu Machine With Face Lifting Skin Tightening Focused Ultrasound Machine  

The Description of Machine

Working Therapy 

Single point ICE + Multi row ICE HIFU12 + Crystallite Depth 8 + ICE Hammer

By using treatment probes of different depths to release cryo--synchronized high-intensity focused ultrasound (Freezing High-Intensity Focused Ultraspund) energy, it can quickly irradiate the subcutaneous fat layer (16mm/13mm/10mm/8.0mm/6.0mm), SMAS fascia layer (4.5 mm), dermis and epidermis layer (3.0mm/2.0mm/1.5mm), the ultrasonic energy can pass through the epidermis, while the skin contact part is maintained at a low temperature to protect the surface layer of the skin. When the high energy acts on the subcutaneous tissue, heat is generated,The freezing point will immediately produce a thermal effect of 60°C to 70°C, which will then crush and dissolve fat cells, stimulate the regeneration of collagen in dermal tissue, reorganize reticular fibers and tighten fascia, improving sagging, loose skin and aging problems in a non-invasive manner. It has multiple effects such as anti-aging and wrinkle removal, lifting and firming the face,dissolving fat and shaping the body.

Principle

Crystallite Depth 8 Principie
Crystallite Depth 8 is a minimally invasive fractional treatment combining microneedles and RF energy.Under the control of the electronic system, dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin. RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin, so that nutritional products can enter the skin, and trigger the body's natural healing response. At this time, the thermal stimulation generated by RF together stimulates the self-repair mechanism of the skin, while liquefying and destroying fat cells, it shrinks a large area of soft tissue and stimulates the production of skin fibrous tissue and collagen, thereby reducing fat, remodeling and Tighten and lift the skin.

In addition, RF can destroy the secretion of sebaceous glands, inhibit inflammation, eliminate acne bacteria, reduce oil secretion, significantly improve large pores, and effectively treat inflammatory acne, etc; for rough and loose skin, fine lines and wrinkles, acne marks, acne pits, and scars , Stretch marks and other different symptoms for personalized skin care.

Ice Hammer Handle Principle
Its principle is to reduce the surface temperature of the skin through cooling conduction to treat or relieve symptoms such as pain and swelling. This low temperature effect can not only improve skin problems, but also bring a cool and comfortable experience. In addition, ice hammer ice compress can also help shrink pores, soothe and calm.

Function

1.Removal wrinkle and firming skin
2.Diminish acne and acne scar.
3.Skin rejuvenation,skin bright,improve skin texture and color.
4.Removal freckles and skin whitening.
5.Improve body fuction-Edema subsided frivoiousimprove blood and lymph circulation.
6.Solve eye problems -Eliminate dark circles,bags under the eyes,eye lines and relieve edema.

Advantage

1. The introduction of innovative semiconductor cooling protective skin technology reduces skin dryness, redness, swelling and other discomforts that may be caused by traditional Hifu treatment. The freezing effect effectively protects the skin and eliminates discomfort reactions and complications caused by heat energy.

2. One 'press' and one 'install' probe can be easily replaced. The plug-and-play probe is safe and convenient. 

3. According to the connection of each probe, the system will automatically identify the treatment site of each probe.

4. The lightweight pen-type probe makes it easier to get close to narrow, small parts and curved areas. The 360º mobile operation is more detailed and will not miss any area.

5. Single point ICE 's flexible sliding operation is combined with cooling protective skin technology to directly cool down the epidermis. The whole process feels ice-cold and almost painless.

6. Single point ICE can be adjusted to hit 1-9 dots per second, with fast dotting speed, more even distribution of energy points, and better efficacy.

7. Different from traditional single-row/multi-row HIFU, Single point ICE fits the face at various angles and can be freely glided to fit the curved surface of the face. It does not limit linear treatment, making it easier to control energy and strengthen the treatment area.

Microneedling is generally a safe and effective treatment, but some side effects may occur in some cases. Common side effects include:

1. Skin redness, swelling and stinging: After microneedling treatment, your skin may experience slight redness, swelling and stinging. This is a normal reaction and usually subsides within a few days.

2. Itchy and Dry Skin: Some people may experience itchy and dry skin after treatment, which may be caused by damage to the skin during treatment and usually disappears after the skin recovers.

3. Pigmentation: After treatment, some people may experience temporary hyperpigmentation due to irritation of the skin, which usually fades over a few weeks.

4. Infection and Scarring: Although rare, skin infection and scarring may occur as a result of RF microneedling. Therefore, make sure your skin is clean before treatment and follow the advice of your doctor or beautician.

Certification 

Shipping

1.We have stock for most of our products, so we can ship within three days upon receiving the full payment. We can make shipment by air or express such as DHL, UPS,FEDEX,TNT,EMS to worldwide, client can receive usually 5~9 days according the different area.

2.For bigger size or some remote area,we can also arrange by shipping by sea or train to your local port.

Company Introduction 

Foshan Feier Electronic Technology Co. , Ltd . is the professional manufacturer of aesthetics & medical laser machines in china . feier has its own research & development, clinic , sales and after-sales department; can offer the professional technology supports and clinic data at the first time. we can keep you always ahead in the beauty field, because of our professional team integrating with optics, machinery, electricity and medicine.We've developed into a modernized company, which covers 1,000 square meter and has 30 employees more. also we establish the branch company in hong kong and office in japan. we took part in the international exhibitions every year. with efforts,Feier company gained a number of domestic and international medical certifications for his different equipments,such as (TUV)CE,ISO9001; with the customer-orientated business philosophy and the purpose of science and technology first, ensure high quality and cost-effective products for customers; which makes us gains lots of customers all over the world. Feier company works hard at all times, is to became a famous international OEM/ODM Manufacturer of all aesthetic & medical equipments in the world .

FAQ 

1 . What will you do when quality problem happened?
We can provide free technical support and software upgrades. Free parts will be sent to you if parts problem.

2. How long are the Lipo Cavitation & RF treatments and how many should I have done ?
The treatments last about 30-50 minutes each and we recommend doing them every 72 hours to allow ample time for the fat to expel completely from your body. While you are able to have up to 12 sessions, most clients will do anywhere between 8-12 before achieving their desired results .

3. What about the delivery?

We can offer the door to door services by air or by sea, just depend on your actual request. Such as DHL, UPS, TNT, FEDEX… 

4. What’s the payment method?

 T/T, WESTERN UNION, MONEY GRAM, ESCROW, Paypal.

5. How is your after-sale service? 

We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, online chat (Google talk, Facebook, Skype). Please contact us once the machine has any problem. Best service will be offered.

6. Why should you choose us? 

Fair is to became a famous international OEM/ODM manufacturer of all beauty machine in the world, and committed to providing global customers with high-end products, OEM ODM services and 24 hour online after-service. We can realize your customized designs of box package, user manual and logo printing service.